Unique fabrics and skilled workers are the key factors that make us an unshakable leader in the industry.
The fabrics of all products that are customized by our unique formula have below features: water-proof,mositure-proof, mildew-proof, unfading and most important, our fabrics meet EU environmental standards and have RoHS & REACH Certificate of Compliance.
The sewing techniques of our products are processed by the skilled workers who have been working for us for over 15 years.
MSRP: US$279
Material Composing
Top & Back
(from outer layer to inner layer)
1. 1680D Polyester (Waterproof)
2. Polyurethane Foam (5mm)
3. EPE  (5mm)
4. PP Board (4mm)
5. EPE (10mm)
6. Polyurethane Foam (5mm)
7. Polyester Velboa Fabric
Material Composing
(from outer layer to inner layer)
1. 1680D Polyester (Waterproof)
2. Polyurethane Foam (5mm)
3. EPE  (5mm)
4. ABS Hollow Sheet (5mm)
5. EPE(10mm)
6. Polyurethane Foam (5mm)
7. Polyester Velboa Fabric
  • Designed to fit 2 electric guitars
  • Ultra-thick pads all over the interior of the case
  • Adjustable padded neck cradle
  • Removable strap pin protection pad
  • Large front storage pockets 
  • Reinforced side haul handle 
  • Extra top handle and back handle
  • S-type shoulder straps 
  • Special pocket for shoulder straps
  • The zippers have been under mechanical test over 8000 times
  • PVC foot pad protects the case bottom from rub and aging
Strap Pin Protection
The pad at the bottom which is approximately 40mm thick, protects the strap pin from damage caused by the shock when falling onto the ground. The pad can be removed or relocated for different sizes of instruments.
Padded Neck Cradle
The case features a padded neck cradle with Velcro to hold the instrument. With this protection, regardless of any situation, your instrument is firmly in place and the headstock is fully protected against backward drops and side-to-side impacts.
Front Pockets
There are 2 pockets in the front, a small one at the top and a big one at the bottom. In the bottom pocket, there are 3 independent compartments. With these compartments, you can well organize your items.
Room for Two
AA31-2EG is designed for 2 electric guitars. There's a thick pad that seperates the 2 guitars.
Hideable Straps
There is a pocket on the back of the case where you can hide the straps to keep them clean and moreover, it protects you from being stumbled by accidentally stepping on the straps when you carry the case with the side handle.
Industrial Zippers
All MusicArea zippers have passed through the mechanical tests by zipping and unzipping over 8000 times.
Water-Proof Material
There’s waterproof coating on the  surface and PVC coating on the opposite side, which effectively prevent rain or water from infiltrating into the case.
Top Handle
You can drag the case by the handle on the top case.
Footholds and Wheels
Two footholds at the bottom to hold the case. Two wheels at the bottom for you to drag the case.
Side Handle
The reinforced side handle padded with soft memory foam and fixed firmly by zinc alloy rivets provides you a comfortable and sturdy grip.
Back Handle
The back handle allows you to use it uprightly in line to avoid inconveniencing other people by lifting the case with the side handle.
Shoulder Straps
S-shaped shoulder straps are ergonomically designed to reduce the burden on the shoulders.
Material Composing from outer layer to inner layer
​TOP & BACK:  ​
  1. 1680D Polyester (Waterproof)
  2. Polyurethane Foam (5mm)
  3. EPE  (5mm)
  4. PP Honeycomb Plate (4mm)
  5. EPE (10mm)
  6. Polyurethane Foam (5mm)
  7. Polyester Velboa Fabric  
  1. 1680D Polyester (Waterproof)
  2. Polyurethane Foam (5mm)
  3. EPE  (5mm)
  4. ABS Hollow Sheet (5mm)
  5. EPE(10mm)
  6. Polyurethane Foam (5mm)
  7. Polyester Velboa Fabric 
Lining material: Soft non-scratch and environmental soft Velboa Fabric on the internal surface   
Internal dimensions:  ​
  • Length: 1029 mm / 40.5 ins  
  • Lower Bout Width: 356 mm / 14 ins  
  • Upper Bout Width: 279 mm / 11 ins  
  • Depth: 127 mm / 5 ins
Net Weight:  ​
  • 5.5kg / 12.13 lbs

Feature Comparison of Guitar/Bass Series
Designed for Protection

Series Name AA31 DRAGON HAN30 WIND30 TANG30 RB30 WIND20 RB20
Surface Material 1680D Polyester
1680D Polyester 900D Polyester
900D Polyester 900D Polyester
Water-Proof +RainCover
Padding thickness 30mm 30mm 30mm 30mm 30mm 30mm 30mm 20mm
Front Reinforcement Board        
Back Reinforcement Board        
Side Reinforcement              
Zinc Wall Hanging Hook  
Hideable Straps    
Storage Pockets 3 10 4 6 4 5 3 1
Removable Neck Cradle    √+Lock √+Lock  √+Lock+Pocket
Removable Strap-Pin Bumper    
Reflective Stripes for Safety          
Two Instruments Model            
Hard-Wearing PVC Pad
Optional Colors Black Gold Brown Black, Green Black, Grey Black Black, Green Black
Optional Instruments EG, EB, 2EG, 2EB EG, EB, DA EG, EB, DA, CG EG, EB, DA, CG EG, EB, DA, CG, 1A1E EG, EB, DA, CG EG, EB, DA, CG EG, EB, DA, CG
EG=Electric Guitar, EB=Electric Bass, DA=Dreadnought Acoustic Guitar, CG=Classic Guitar
2EG=2x Electric Guitars, 2EB=2x Electric Basses, 1A1E=1x Acoustic + 1x Electric Guitar (two guitars)